Net Weight: 20.46lbs

Shipping Weight:22.75lbs

• Manufactured to conform to PS 15-69 & ASTM D5421.
  
  
• Nexus and C-Veil + 2 mat to build up 100 mil resin rich Corrosion Liner.
  
  
• Hand laid, integral type construction, woven roving used continuously from flange face to hub for 3 inches size and larger.
  
  
• Uniform external surface and stub outside diameter stub end surface prepared for immediate bonding.
  
  
• Bolt holes of drilled flanges are spot-faced and coated with resin.
  
  
• Standard stock items available in DERAKANE "MOMENTUM" 411 and 470, Derakane 441-400, Hetron 992.

Hand Lay-up Stub Flanges Standards (ANSI)
Nominal Diameter d	Pressure Rating (psi)	Stub Thickness t	Stub Length L	Pyramidal Length L1	Flange Diameter D	Bolt Circle Dimeter C	Flange Thickness T	No.of Holes n	Bolt Hole Diameter h
10"	150	0.5"	10"	7.1875"	16.5"	14.25"	1.4375"	12	1"
Information appearing in this literature concerning our products is based on facts and data believed to be accurate; however, it is the user's responsibility to determine the suitability for his own use of the products described herein. No guarantee, expressed or implied, is made by Litek Composites Corp (LCC), as to the effects of such use, not does LCC assume any liability arising out of the use of the products described herein.