FRP Filament Wound Pipe - Fiberglass Filament Wound Pipe @ FRPsupply

Manufactured to conform to ASTM D2996
C-veil and Nexus + 2 Mats 100mil resin rich corrosion liner
150psi ratings are suitable for operating temperatures to 220° F
54 to 56 degrees Helical Winding for maximum strength suitable for high working pressure
C-veil + UV Inhibitor Glossy exterior finishing for extra weathering and corrosion protection

1/2" to 36"Stub flange specification.

Nominal Diameter ( D )	Wall Thickness ( t )		Pipe Length ( L )
inch	inch		foot
inch	50psi	150psi	foot
2	-	3/16	20
3	-	3/16	20
4	-	3/16	20
6	3/16	1/4	20
8	3/16	1/4	20
10	3/16	5/16	20
12	3/16	3/8	20
14	3/16	7/16	20
16	3/16	7/16	20
18	3/16	1/2	20
20	3/16	1/2	20
24	1/4	5/8	20

Weight:: 7.15 LBS

2
The product is not as described it was supposed to be 7/16" in thickness it came much thicker. While this may not be a big deal for others we were purchasing for a specific application.

Posted by Omar on Jun 27th 2023

Dimensions are important and they should be properly identified.